Kunji

Drying and Dehumidifying

Drying and dehumidifying series has been designed for drying plastic raw materials with a stable low dew-point air below -40 with the maximum drying capacity of up to 1,000kg per hour (in the case of PET).

Feeding and Conveying

Feeding and conveying series are capable of auto dedusting and sounding alarm of material shortage via digital microcomputer control. A closed conveying is designed to save material and avoid hydroscopicity of material during the process.

Heating and Cooling

Shini Mold Temperature Controllers are designed for heating up molds and maintaining temperature. They also can be used in other similar applications. Accuracy of temperature control is via OMRON controller and maximum temperature can reach 300.

Dosing and Mixing

Mixing and Dosing series are designed for the metering of raw material, reclaim, masterbatch and additive. With the throughput ranging from 40kg/hr to 3,000kg/hr, up to 8 groups of components can be simultaneously handled and the accuracy ranges from ±0.3%.

Granulating and Recycling

Shini Low-speed Granulators are designed for instant granulating and recycling of sprues and few rejects next to IMM. Equipped with dual-safety devices, and conforming with European Safety Standard.

Automation System

Shini Automation is designed for removing sprues and finished products from injection molding machine, it is available for the applicable of or IML applicable 2-plate, 3-plate molds, hot runner system.

Hot Runner System

It's suitable for materials which is in the rang 0.6-0.8. mould hot nozzle to 12. ensure the strength and the special requirements of products. the length of nozzle can be from 40mm to 500mm. professional analysis of mold flow. composite technology is mature.

Central Conveying and Accessories

HT-Series(Taiwan)

The standard capability of the HT series makes it applicable to a wide range of products like housewares, kJ( MEI3 electronic product casings, automotive parts, lens, and frames. This series may apply a semi-closed loop system for more intricate products like optical or handset devices.

HN-Series(Ningbo)

HN Series HN Series Related to the standard universal types that give wide range of applications including domestic hardware, electronic information product casings, automobile arts, lens, and frames. The series adopts high-efficient professional servo motor and driver system. It can save 70% more power than ordinary fixed pump injection molding machine. At the same time, closed loop was formed, so the precious and stability were improved.

LM-Series

A newly designed injection unit for precise and stable injection. Provides stable clamping force while injection, yielding a high mold rate. Newly designed automatic mold adjustment system enables faster mold changes. Low-pressure protection to enhance the mold life. Fast mold opening speed which reduces the molding cycle time. A larger mold clamping stroke and capacity than traditional machines well suited for products with greater depth. A smaller two-platen design for space efficiently. *PCP (Process Data Protocol) FCS power-saving system to achieve an average power saving of 30%-70%.

IntElect – highly precise

An all-electric injection moulding machine characterised by its high precision and energy efficiency. Low operating costs are what makes IntElect particularly efficient. The machine was built based on Sumitomo’s unique know-how in the development of all-electric drive systems.

El-Exis SP – incredibly fast

With extremely short cycle times and the shortest injection times El-Exis SP is the ideal machine for the application in the high end packaging production. The machine convinces with its robustness and extreme filling dynamics.

Systec SP – highly dynamic

Systec SP is equipped with a hybrid drive system and is particularly suited for applications in packaging production. Short cycle times and high availability provide the ideal solution for many quick applications. The Systec SP stands for production effi cient processes and maximum cost effectiveness with best results.

Systec – highly flexible

The Systec is a hydraulic injection moulding machine with a hybrid drive concept. It is designed to be extremely energy efficient and can be flexibly adjusted to many requirements and production processes – with possibilities ranging from the wellequipped basic model to the individually configured production cell.